Well Control, Well Pressure, and Industry Recommended Practices
- Formation and fracture pressures
- Leak off tests
- Kick tolerance and MAASP
- Gas expansion and casing seat selection
- Introduction to API RP 59 “Recommended Practices for Well Control Operations”
The first day will teach participants about well control history, formation and fracture pressures, and leak off tests. Kick tolerance and the determination of Maximum Allowable Annular Surface Pressure (MAASP) will also be covered. API RP59 will be reviewed to familiarize participants with this important industry recommended practice. The day will end with conversations over gas expansion and casing seat selection.
Kick Causes and Well Control Concepts
- Kick causes and warnings
- Primary and secondary well control
- Lost circulation and kick detection
- Shut-in procedures and shallow gas
- Kill sheet basics and usage
Day two will focus on kick detection and well control basics. Kick causes, warning signs, primary and secondary well control, and lost circulation, will be covered. The day will end with discussions over shut in procedures, shallow gas, and kill sheet usage.
Well Control Methods
- Drillers method
- Wait and weight method
The third day participants will learn about the classical well control methods. Specific methods that will be covered include the drillers method and the wait and weight method. Special concerns and changes needed to circulate out kicks on floating drilling operations will be discussed. With an understanding of these methods the participants will calculate and set up various well control scenarios.
- BOP equipment
- Well control equipment
The selection, installation, operation, maintenance, and testing of BOP equipment will be discussed on this day. Important equipment selection criteria such as pressure limits, auxiliary units, and closing units will be discussed. Exercises related to equipment sizing will be performed.
- Subsea equipment
- Well control exercises
The last day of the course will cover subsea equipment and several well control exercises.
Drilling supervisors, drilling engineers, drilling superintendents, and drillers who are going on to full IWCF or IADC certification will greatly benefit from this course. This course would benefit all personnel who design, plan, and manage drilling operations.
Participants should have general math and science skills, along with a minimum of one year drilling related experience. Hand held calculators will be needed for class exercises.
Bandung is the capital of West Java province in Indonesia. Located 768 m (2,520 ft) above sea level, Bandung has relatively year-around cooler temperature than most other Indonesian cities
Bandung is renowned for its large stock of Dutch colonial architecture; most notably the tropical Art Deco architectural style. The modern and native architectural blending was followed by several Dutch architects that have shaped the city landmarks. In the 1930s, Bandung was known also as the city of architecture laboratory because of many Dutch architects made some experiments with new architectural designs.
Bandung has served for popular weekend-break destination for people living in Jakarta for many reasons. The cooler climate of highland plantation area, the varieties of food, the cheaper fashion shops located in factory outlets and distros, golf courses, and the friendliness of local people have become the main attraction of the city.
Bandung Husein Sastranegara International Airport serves direct flights to Batam, Surabaya, Yogyakarta, Denpasar, Palembang and Padang and also international services from Kuala Lumpur and Singapore Changi Airport. The airport is located nearby the Dirgantara aerospace complex and Dirgantara Fairground.
From Wikitravel licensed under Creative Commons Attribution-ShareAlike 3.0
- Timezone : GMT+07:00, Bangkok (Bangkok)