Oil & Gas Training
and Competency Development

Location Oslo, Norway
Start19 Nov 2020
End20 Nov 2020
Discipline Geology
LevelSkill
Duration2 Days
CostUSD 2,000.00
Delivery Mechanism Practical Training with Software
This course is delivered with eBooks



Print Email

Petrel Fracture Modeling

4.5 Average client rating (based on 179 attendee reviews)

This course covers the concepts of fracture modeling in relation to how it is used in Petrel and the oil industry in general. It focuses on which input data are available (like image log interpretations) and how they can be used in Petrel. Various processes will be used to view, quality check and manipulate the input fracture data (logs, stereonets, etc.)

 In Petrel, fracture modeling is split into two processes; generation of a Fracture Network model and Upscaling fracture attributes to generate fracture porosity, permeability and Sigma (connection) factor. The Fracture network model consists of a Discrete fracture network (DFN) and Implicit fracture properties (IFM). Various geological, structural and  seismic fracture drivers will be used for Fracture intensity description, and  ultimately combined using artificial neural networks. The fracture modeling course will briefly cover how the output fracture properties can be used for simulation.

  • Topics
  • Audience
  • Prerequisites
  • Location
  • Topics

    • Fracture theory
    • Point well data and Image log import and display
    • Create tadpoles and rose diagrams
    • Stereonets; dip/azimuth/filters/fracture sets
    • Generation of fracture intensity logs and cumulative logs
    • Fracture density maps
    • Upscaling of well logs and 3D modeling of intensity
    • Building stochastic Fracture models
    • Fracture attribute generation
    • Upscaling fracture properties

    Use of multiple fracture drivers 

    • Fracture theory
    • Point well data and Image log import and display
    • Create tadpoles and rose diagrams
    • Stereonets; dip/azimuth/filters/fracture sets
    • Generation of fracture intensity logs and cumulative logs
    • Fracture density maps
    • Upscaling of well logs and 3D modeling of intensity
    • Building stochastic Fracture models
    • Fracture attribute generation
    • Upscaling fracture properties

    Use of multiple fracture drivers

  • Audience

    Development and exploration geologists, geophysicists, petroleum engineers, reservoir engineers and technical personnel with prior experience in Petrel.

  • Prerequisites

    Petrel Geology or equivalent Petrel experience. General good knowledge of Petroleum Geology.

  • Prerequisites

  • Location

    Oslo

    Schlumberger Information Solutions AS,
    Aslakveien 14 E,
    0753 Oslo,
    Norway

    Oslo Training Centre

    Schlumberger Information Solutions AS,
    Aslakveien 14 E,
    0753 Oslo,
    Norway

    All Classes begin promptly at 9:00 am and finish at 4:00 pm.

    How to get from the Airport to Oslo city

    When you get to Oslo Airport Gardemoen the easiest and fastest way to get to town is by taking the “Flytoget” (the airport express train). It takes only 21 minutes to get to Oslo Central Station. The ticket is 160 NOK, and can be bought with creditcards on special new credit card machines before you board the train. (Note: when going back to the airport you have to slide your card through the machine before and after the journey). Once at the Central Station it would be easiest to then take a taxi to the hotel.

    Please find the links to the train and bus schedules below:

    How to get to the Schlumberger offices in Asklakveien 14E

    The Underground station is a blue sign with a big T in a circle (“T-bane”). Buy a ticket before you get on the train (See Fares below). Take line number 5 towards Østerås and get off at Røa. The stop before Røa is called Hovseter.

    If you wish you can take a taxi from the hotel to Schlumberger’s offices. If you're traveling in a group, this may be cheaper and easier than catching the train. The trip will take approximately 15-20 minutes, depending a bit on traffic of course.

    10 minutes walk: When you get to Røa station you go to the other side (as though you are taking the train back) and start walking over the parking place and on to a small gravel road. Then continue straight through the housing area and past the parking place. You then take a left and continue straight on to the road makes a natural right turn. You will see Schlumberger’s offices on your left hand side.

    Fares (03/2009)

    Single ticket - NOK 25 (good for 1 hour, NOK 36 if bought from bus/tram driver)
    Flexikort (8-Trips) - NOK 180
    Dagskort (24-Hour Pass) - NOK 65
    7 dagers kort (7-Day Pass) - NOK 200
    Monthly Pass NOK 550 (transferable)

    All tickets are valid on buses, tram (trikken), metro (T-bane), boats and local trains within Oslo. Tickets have to be validated before starting the first trip.

    Note: In case you register from any of the following companies:
    Addax Petroleum, Amerada Hess, BG Group, ConocoPhillips, Gaz de France Suez, RWE Dea, Shell, Statoil or Talisman Energy a Purchase Order is required.
    Please provide the PO number in the appropriate field in the registration form and send a copy of the PO to paulsen2@slb.com

    • Timezone : GMT+01:00, Europe (Amsterdam)
    • Directions :

      How to get from the Airport to Oslo city

      When you get to Oslo Airport Gardemoen the easiest and fastest way to get to town is by taking the “Flytoget” (the airport express train). It takes only 21 minutes to get to Oslo Central Station. The ticket is 160 NOK, and can be bought with creditcards on special new credit card machines before you board the train. (Note: when going back to the airport you have to slide your card through the machine before and after the journey). Once at the Central Station it would be easiest to then take a taxi to the hotel.

      Please find the links to the train and bus schedules below

      Train: http://www.flytoget.no/

      Bus: http://www.flybussen.no/oslo/

      How to get to the Schlumberger offices in Asklakveien 14E

      The Underground station is a blue sign with a big T in a circle (“T-bane”). Buy a ticket before you get on the train (See Fares below). Take line number 5 towards Østerås and get off at Røa. The stop before Røa is called Hovseter.

      If you wish you can take a taxi from the hotel to Schlumberger’s offices. If you're traveling in a group, this may be cheaper and easier than catching the train. The trip will take approximately 15-20 minutes, depending a bit on traffic of course.

      10 minute walk: When you get to Røa station you go to the other side (as though you are taking the train back) and start walking over the parking place and on to a small gravel road. Then continue straight through the housing area and past the parking place. You then take a left and continue straight on to the road makes a natural right turn. You will see Schlumberger’s offices on your left hand side.

      Map of walk to center

       

    • Accomodations :

      In terms of hotel we suggest the Radisson Blu Plaza Hotel, you can make reserverations at http://www.radissonblu.com/plazahotel-oslo

NExT Technical Forum:
Continue your in-class discussion and questions in an online community