Oil & Gas Training
and Competency Development
Competency Management system SLB NEXT

Petrel Structural Modeling - RILS (Remote Instructor Led Series)

This is a Remote Instructor Led Series (RILS) training. The remote classroom delivery is a modality that takes advantage of the instructor led training content, while allowing the same content to be delivered remotely. All training sessions will be delivered online with no face-to-face classroom attendance.

The Petrel 2017 Structural Modeling - RILS course presents the flexibility of Petrel and the different approaches that enable you to build 3D models ready for simulation. The course details different approaches to building models that capture geologically complex situations, such as reverse faults and truncations.

The first part of the course demonstrates the real power of Petrel in building watertight frameworks of structurally and stratigraphically complex regions using the new Volume Based Modeling functionality. It is also demonstrates the robust Fault modeling while interpreting seismic functionality which allows rapid real-time creation of the Structural framework, placing the geophysical interpretation at the core of good model building.

The same structural model created with Volume Based Modeling technology is the input to compute a flattened, non-deformed space (Depospace) that can eventually be used for property population honoring shape and position of objects, facies and variogram ranges.

Troubleshooting methods addressing the main issues the user can face while building the structural framework model and how they can be corrected are also covered.

The second part of the course presents the standard Corner Point Gridding approach used for the construction of a 3D grid.

Possible workflows combining Structural framework and Corner point gridding are also covered.

Additional tools available to optimize the resulting models are presented and can be used if holding the Structural and fault analysis license. Exercises related have also been included.

The course will be delivered over a total of 21 Hours; i.e. in five (5) sessions lasting four (4) Hours each, except the first and fourth sessions which will each last 4.5 Hours.

Each participantwill need the following for an optimal experience of the course:

  • Windows-based PC
  • USB headset
  • Internet access
  • Second monitor or tablet for the course manual(s)
  • Webcam

Day 1

Session 1 : Modules 1, 2, 3 & 4 (Part 1)

(4.5 Hours)

  • Introduction to modeling
  • Introduction to Structural framework and the concept of Volume-based modeling
  • Generation of the Fault framework 
  • Boundary definition and Horizon modeling

This session will introduce the participants to the basic concepts of 3D structural modeling and to an overview of the Petrel Structural framework modeling workflow and the Volume-based modeling (VBM) technology. Then, the participants will sequentially learn how to define a new structural framework and generate a fault framework, how to create or update a fault model on the fly, how to define the geometry/resolution of a structural model, build a non-refined model, quality check and optimize the model built.


Day 2

Session 2 : Modules 4 (Part 2), 5 & 6

(4 Hours)

  • Boundary definition and Horizon modeling
  • Zone model refinement and creation
  • Troubleshooting

In this session, after completing Module 4, the participants will build a refined watertight structural model that can be used in the Structural gridding process. They will also discover troubleshooting methods and solutions to issues which can be encountered in the structural framework workflow. 



Day 3

Session 3 : Modules 7, 8 & 9

(4 Hours)

  • Depospace
  • Structural gridding
  • Conversion of a structural framework to pillar fault model

Depospace is a virtual space suitable for both compressional and extensional settings, in which the stratigraphic function (and the resulting conformable horizons) are unfaulted and unfolded. In this session, the participants will first learn about the purpose and process for creating a depositional space. Then, they will apply the Structural gridding process to create a stair-stepped grid ready for simulation. Finally, the participants will be introduced to the workflow for converting a structural framework to a pillar fault model.


Day 4

Session 4 : Modules 10, 11, 12 & 13

(4.5 Hours)

  • Data preparation for Corner point gridding
  • Introduction to Corner point gridding and Main faults modeling
  • Pillar gridding
  • Make horizons

Often, input data for Corner point gridding initially needs pre-conditioning to improve the success of modeling. This session will start by presenting how to use the tools in Petrel to solve common problems associated with input data (polygons, fault sticks, seismic horizons, surfaces, etc.) and how to define and generate the main faults in a model, based on the input data prepared. Then, the participants will learn about generating a 3D grid through the Pillar gridding process, inserting stratigraphic horizons into the 3D grid created and optimizing the horizons with respect to honoring the faults.


Day 5

Session 5 : Modules 14, 15, 16 & Appendices 

(4 Hours)

  • Truncations and 3D grid editing
  • Reverse fault modeling using Corner point gridding
  • Model salt diapirs using Corner point gridding
  • Appendix A - Operations for model optimization
  • Appendix B - Seismic dummy volume creation

In addition to covering the workflow of inserting minor faults into a 3D model, this session will focus on the concepts and methodologies for modeling reverse faults and salt domes using the Corner point gridding. Salt domes are diapiric masses of salt, of considerable economic importance because they can develop oil traps. Finally, additional tools available to optimize the resulting models will be presented.


Learning activity mix

Development and exploration geologists, geophysicists, petroleum engineers, managers, reservoir engineers and technical personnel with prior experience in Petrel.


  • Introduction to Modeling
  • Structural framework
    • The Concept of Volume Based Modeling
    • Generate the Fault framework
    • Fault framework while interpreting
    • Boundary definition and Horizon modeling
    • Horizon filtering attribute
    • Refine and create zone model
    • Troubleshooting
    • Depospace
    • Structural gridding
  • Corner Point Gridding
    • Data preparation
    • Modeling of main faults
    • Pillar gridding
    • Make horizons
    • Truncations
    • Reverse faults
    • Modeling salt diapirs
  • Tools for model optimization


General knowledge of petroleum geology and geophysics. As well as Participation in the Petrel Fundamentals and Petrel Geology courses or equivalent Petrel experience is necessary.


Currently there are no scheduled classes for this course.

Click below to be alerted when scheduled

Set a training goal, and easily track your progress

Customize your own learning journey and track your progress when you start using a defined learning path.

In just few simple steps, you can customize your own learning journey in the discipline of your interest based on your immediate, intermediate and transitional goals. Once done, you can save it in NExTpert, the digital learning ecosystem, and track your progress.
© 2021 Schlumberger Limited. All rights reserved.