×
Oil & Gas Training
and Competency Development
1
  • ;
    Oil and Gas Training Courses SLB NEXT

    Spill Prevention, Control, and Countermeasures

    Course Objective

    • Chemicals are inherently hazardous but are even more dangerous if they are spilled on the ground. Chemicals can react with air, the ground itself, or create a by-product that can cause toxic effects to the ground if left alone. This course helps to assess how to prevent these spills by understanding how they occur and the different techniques that preformed to protect workers from these spills. The workers will also be assessed on the different types of personal protective equipment which will be used to effectively remove spills and how to notify the supervisor of the spill and leave the area safely.
    The following points shall be discussed in the course:
    • Describe the EPA’s Spill Prevention, Control, and Countermeasure rule is and why it was created
    • Identify facilities and oils covered by the Spill Prevention, Control, and The countermeasure rule is and why it was created
    • Identify facilities and oils covered by the Spill Prevention, Control, and Countermeasure Rule
    • List Common Oil Storage and Handling Types
    • Identify Spill Prevention Measures
    • Describe Employee Training
    • Identify Control Measures
    • Define Response Planning Levels
    • Describe Spill Countermeasures
    • Describe Proper Disposal Practices
    Activities
    • Classroom with Theoretical and Practical Implementation

    Day 1

    Session 1 - Course Introduction  

    • Definition of a Spill
    • Scenarios in which a spill can occur
    Session 2 – EPA Pollution Prevention Program
    • The purpose of the Pollution Prevention Program
    • Scope for Chemical Handling in the Workplace
    • Facilities covered by the EPA Pollution Prevention Program
    • Steps to the EPA Pollution Prevention Program
    Session 3 – Roles and Responsibilities
    • Indicating the roles and responsibilities of employees during a spill
    • What indicates a certified worker to remove a spill.
    • Adequate steps for workers to leave the area of the spill.
    • Indicate the training and qualifications needed to safely react during a spill
    Session 4 – Identifying Risk Factors
    • The JHA Format
    • Steps to JHA
    • How to identify hazards, specifically the chemical hazards of the spill
    • Indicate the actor and action for each step
    • Storage and handling of materials to avoid spills
    • Drainage and its importance in preventing spills in the workplace
    • Drainage and its importance in preventing the spread of spills in the workplace
    • The effects of the spills on the organization depending on the chemical composition
    Session 5 – Controlling Spills
    • Control Measures for preventing the spill from contaminating surfaces
    • The importance of the spill kit
    • The components of a spill kit
    • Control Measures for preventing the spill from spreading to other areas
    Session 6 – Discussion  
    • Workers will be asked to discuss the different spill scenarios that may lead to spills in the workplace
    Session 7 – The Variety of Personal Protective Equipment
    • Selection Criteria for personal protective equipment for Spills
    • The correlation of Personal Protective Equipment for the spills
    • Different Gloves and their material (Butyl, Latex – Vinyl, Neoprene, PVA, PVC, PVC/Nitrile)
    • Different Boots and their material (Butyl, Natural Rubber, Neoprene, Nitrile, PVC, PVC/Nitrile
    • Testing for efficiency of PPE through Permeation, Breakthrough time, Degradation, and Penetration
    Session 8 – Spill Prevention and Control
    • Definition and examples of Containment
    • Confinement scenarios of Absorption, Blocking, Collection, and Diking
    • Decontamination methods of Dilution, Absorption, Degradation, Isolation, Neutralization, and Disposal
    Session 9 – Emergency Response
    • The importance of emergency response to spills
    • How to react during a spill
    • The significance of calling the emergency services
    • How to react if you are the one responsible for removing the spill
    • How to communicate with your supervisor to go to the desired emergency evacuation area
    Session 10 – First Aid
    • Workers shall effectively discuss and demonstrate different first aid techniques for spill injuries.

    • Chemical Handling Employees


    • Understand the Effects of Exposure to Hazardous Materials.
    • Understand the Basics of Industrial Pollution Prevention.
    • Understand the Basics of Spill Control and Containment.
    • Understand the Basics of Development a Spill Response Plan.
    • Introduce Pollution Prevention and Discuss Its Role in Today’s Industry.
    • Introduce Spill Control and Discuss Its Role in Today’s Industry.
    • Introduce Skills Required for Spill Control of Industrial Materials.

    N/A

    Currently there are no scheduled classes for this course.

    Click below to be alerted when scheduled

    Set a training goal, and easily track your progress

    Customize your own learning journey and track your progress when you start using a defined learning path.

    Icon
    In just few simple steps, you can customize your own learning journey in the discipline of your interest based on your immediate, intermediate and transitional goals. Once done, you can save it in NExTpert, the digital learning ecosystem, and track your progress.
    © 2021 Schlumberger Limited. All rights reserved.