• Class and Course

    Well Design and Construction Engineering - Heriot-Watt University Course

    This course gives an overview of the well construction process and an introduction to subsea drilling operations. The goal of the course is to provide an insight into the planning and execution of a modern drilling operation. Emphasis will be on the conceptual design and detailed engineering design calculations involved in planning a well.

    This course forms part of the Heriot-Watt Distance Learning MSc Petroleum Engineering.  Classes may be attended by individuals who seek to understand better the subject but who are not registered for the degree course.  To find out more about the MSc Petroleum Engineering go to: http://www.nexttraining.net/masters.cfm

    Day 1
    • Overview of Drilling Operations
    • Exploration & production licenses, Drilling personnel and Rotary drilling equipment
    • The drilling process onshore and offshore
    • Drilling economics
    • Rig Components
    • The Drillstring
    • Design of the drillstring
    • Drilling Bits
    • Design of PDC and Roller Cone Bits, selection of bits, grading of dull bits, assessing and improving the performance of drill bits.
    Day 2
    • Formation Pressures & Well Control
    • Introduction to origin and representation of pore pressures and fracture pressures
    • Origin, prediction and detection of abnormal pressures
    • Drilling problems associated with abnormal pressures
    • Prediction and confirmation of formation fracture pressures
    • Principles of primary & secondary well control
    • Warning signs of kicks
    • Well killing procedures
    • BOP equipment and BOP stack arrangements.
    Day 3
    • Drilling Fluids, Hydraulics and Casing
    • Functions, properties, design/selection of various types of drilling fluid
    • Wellsite tests performed on drilling fluids
    • Design of a solids control system
    • Introduction to pressure losses in the drilling system
    • Optimization of bit hydraulics
    • Major functions and properties of casing and casing string configurations
    • Casing running operations
    • The casing design process
    Day 4
    • Cementing and Directional Drilling
    • Functions and properties of cement, single and multiple stage cementing operations
    • Designing a cementing operation
    • Assessing the quality of the cement sheath
    • Introduction to directional drilling
    • Designing the trajectory for a directional well
    • Directional drilling tools and BHAs
    • Introduction to wellbore surveying
    • Calculating the trajectory of a directional well based on survey data
    • Directional surveying tools
    Day 5
    • Measurement While Drilling and Subsea Drilling
    • Introduction to MWD and the value of real time data
    • MWD data collection and transmission techniques
    • Introduction to tools and equipment used to drill from a floating drilling rig
    • Course review

    Trainee drilling engineers, petroleum engineers and specialist service company engineers

    Exposure to drilling operations

    Currently there are no scheduled classes for this course.

    Click below to be alerted when scheduled

    Set a training goal, and easily track your progress

    Customize your own learning journey and track your progress when you start using a defined learning path.

    In just few simple steps, you can customize your own learning journey in the discipline of your interest based on your immediate, intermediate and transitional goals. Once done, you can save it in NExTpert, the digital learning ecosystem, and track your progress.
    © 2024 SLB Limited. All rights reserved.